I have this rs corco high pressure centrifugal pump. This item is an industrial centrifugal or positive displacement pump, likely used for handling liquids in sanitary applications such as food or pharmaceutical processing. Designed for transferring fluids of varying viscosities with minimal pulsation or shear. Output: 7.5 HP Poles: 2 Frequency: 60 Hz Torque: 11.1 lb.ft Voltage: 208-230/460 V Frame: 213T RPM: 3510 Full Load Amps: 19.8-17.1/8.57 A Efficiency (100%): 89.5 Power factor (100%): 0.90 Insulation: F Noise: 72 dB(A) No load current: 5.00/2.50 A Locked rotor current (II/In): 7.0 Service Factor: 1.15 FL Amps @ High: 8.97 FL Eff (%): 89.5 C Dimension (in): 17.952 Electric Motors : Hazardous Locations : Three-Phase : Explosion Proof - NEMA Premium Catalog Number: 00736XT3E213TC WEG id: 12408341 Description WEG Explosion Proof motors are suitable for applications requiring UL or CSA certification for hazardous locations. Thermally protected with thermostats, all motors manufactured are submitted to hydrostatic as well as other routine testing at the factory to ensure compliance to the required specifications. WEG NEMA Premium Efficiency Explosion Proof motors are specifically designed to meet or exceed all EPAct requirements for energy efficiency. Applications Petroleum and gasoline Flour / feed mills Grain elevators Fans Pumps Blowers Material handling equipment Other applications requiring motors UL or CSA listed for hazardous locations Standard Features Efficiency Certification number CC029A according to US Department of Energy Regulations Three-phase, 60Hz Voltage: 208-230/460, 460 or 575V Squirrel cage rotor / Aluminum die cast Totally Enclosed Fan Cooled - TEFC (IP55) Ball bearings are supplied as standard Cast iron frame Class F insulation Temperature rise: Class B (80ºC) Service factor: 1.15 Inverter Duty as per CSA Standard (LR50962) NEMA dimensions NEMA ratings design B Continuous Duty (S1) 104ºF (40ºC) ambient temperature Altitude: 3300 ft (1000 m) 1045 Carbon Steel Shaft for frames up to 365T 4140 steel shaft for motors 404T and above. (3600 RPM motors supplied with 1045) Class F insulation for all frames Class H impregnation resin F1 mount Stainless steel nameplate Paint: Synthetic Enamel alkyd resin base (exceeds ASTM B117 salt spray test) Color: RAL 5009 - Blue NPT threaded terminal box Non-sparking fan Thermostats Grease fitting from 364T up to 586/7
Företagsutrustning